Low Frequency Heating Systems
IROSS™ Line Frequency Systems provide unique benefits over other types of induction heating units. Because the IROSS™ systems use low frequency induction (60hZ), they can be used to heat large and irregularly shaped workpieces for a variety of applications. These systems are generally used to achieve temperatures of 120 to 1600 Fahrenheit within a short amount of time, which makes it an attractive alternative to furnace/oven heating. Utilizing a low frequency allows for the heating of a large area as the depth of penetration depth is greater than that of a higher frequency induction system.
Some applications include:
- Shrink fitting
- Mold preheating
- Stress relieving
- Curing of rubber
- Varnish curing
- Magnet bonding
- Tempering
- Annealing
- Pipe-end annealing
- Pressure vessel heating
- Preheat for welding
- Removal of coatings
- Lamination preheat for die casting & bluing
- Friction weld and swage stress relieving
- Shrink fitting for shafts & gears
- Motor housing disassembly
- Bonding of rubber to metal
Some Automotive applications include:
- Camshaft gear assembly
- Crankshaft gear assembly
- Starter ring gear assembly
- Vibration damper bonding
- Transmission gear assembly
- Timing ring assembly
- Crankshaft flange assembly
- Steering knuckle assembly
- Shrink fitting of Large /Heavy-truck Differential Gears
Tech Specs
| Standard Power Ratings (Other sizes available upon request) | 25, 50 and 75 kVA, 50/60 Hz, single phase |
| Machine Dimensions (W x D x H) | 32” x 42” x 72” (800mm x 1060mm x 1820mm) |
| Available Mechanical Modules | Part Lift, Part Lower, Coil Lower, Stationary |
Accessories
- Infrared temperature control
- Energy monitor
- Custom tooling for armatures, rotors, stators, motor housings, permanent magnet motor bonding, gears and bearings
- Other mechanical system modules available.
